@air
2025-04-08

Basic knowledge that novices to oil-free lubricated air compressors need to understand

If you are a novice who has never used an oil-free lubricated air compressor before, then you should understand the following basic knowledge about oil-free lubricated air compressors, so that you can understand and use air compressors faster.

1. Oil-water lubricated air compressors do not require oil lubrication

Oil-water lubricated air compressor is a special type of air compressor. It is different from traditional oil-lubricated air compressors and does not require the addition of oil for lubrication. This means that no oil stains and oil mist will occur during operation, which is more in line with green requirements. Moreover, since there is no need to consume lubricating oil, it can save a sum of money for air compressor users.

2. The exhaust temperature of oil-free lubricated air compressor is generally not higher than 65℃

During operation, the exhaust temperature of oil-free lubricated air compressor is generally not higher than 65 ° C. This temperature is within the normal range and will not cause damage to the equipment. Therefore, during use, it is necessary to pay attention to the temperature changes of the equipment. If the temperature is found to be too high or too low, it is necessary to stop the equipment in time for inspection.

3. Requirements for water quality of oil-free lubricated air compressors

Oil-water lubricated air compressors have high requirements on water quality, and it is recommended to use treated tap water or deionized water. During use, the water and filter should also be replaced regularly. This is because impurities and minerals contained in water can directly affect the performance and service life of equipment. Therefore, it is necessary to ensure that the water quality used meets the requirements, and that it is replaced and filtered regularly. In practical application of oil-water-lubricated air compressor

In short, understanding the basic knowledge of oil-free lubricated air compressors is very important for novices. By understanding these common sense, you can better use and maintain equipment and extend the service life of equipment. At the same time, some faults and problems can be avoided. Therefore, it is recommended that novices understand these basic knowledge before using oil-free lubricated air compressors.

Welcome!

Related Articles:
@air
2025-03-25

Teach you how to prevent high temperatures and overheating of air compressors

During the operation of the air compressor, high temperatures may occur, which will not only affect the normal operation of the equipment, but may also cause equipment damage. So, how to prevent high temperatures in air compressors? Here are a few practical methods for everyone. 1. Regular insurance…

@air
2025-03-22

How to choose an oil-free water lubrication air compressor for adrenaline production

Epinephrine (Epinephrine) is a key product in the field of emergency medicine and biopharmaceuticals. Its production requires extremely strict cleanliness, stability and safety of air compression systems. Based on international standards such as ISO 8573-1, PIC/S GMP and FDA 21 CFR Part 11, this paper deeply analyzes the technical parameter selection logic of oil-free water […]

@ghuang
2025-03-09

Technical Guide for Air Compressor Selection in Ibuprofen Production

As one of the most widely used non-steroidal anti-inflammatory drugs globally, ibuprofen production demands extremely stringent air quality standards. Air compressors, serving as core power equipment in pharmaceutical manufacturing, directly impact product quality, production efficiency, and regulatory compliance. This guide systematically analyzes air compressor selection strategies for ibuprofen manufacturers through five critical dimensions: air purity, oil-free operation, environmental compliance, energy efficiency, and system stability.

@ghuang
2025-03-10

Technical Guide: Air Compressor Selection for Analgesic Manufacturing

In analgesic production processes, compressed air serves as both a critical power source and process medium. Its quality and performance directly impact drug quality, production efficiency, and operational costs. This guide analyzes compressor selection through four dimensions – production processes, energy efficiency, environmental compliance, and productivity – while emphasizing the strategic value of oil-free compressors, in accordance with international standards.

@ghuang
2025-03-09

Comprehensive Guide to Air Compressor Selection for Penicillin Production Enterprises

Air compressor selection for penicillin production is a multi-faceted engineering task requiring consideration of technical, economic, and environmental factors. Choosing Class 0-certified oil-free compressors with optimized configurations and intelligent controls ensures efficient, stable, and sustainable operations. Future trends will focus on further energy savings, smart integration, and eco-friendly designs to provide better air quality assurance.