@air
2025-04-08

Maintenance guide for oil-water free lubricated air compressors

Oil-water lubricated air compressors have many advantages such as energy conservation, environmental protection, and long life, and have been widely used in various fields such as automobiles, chemicals, and pharmaceuticals. During the daily use of oil-water-lubricated air compressors, daily maintenance needs to be done to ensure normal operation of the air compressor and extend its service life.

1. Daily cleaning and maintenance

Air compressors should undergo basic daily cleaning and maintenance every day, including dust removal, floating dust, etc. If the environment is cleaned, the wear and tear of the machine can be greatly reduced. For filter elements, supercharger and other parts, patient and meticulous cleaning are also needed to keep them clean and tidy.

2. Replace the filter element regularly

The filter element is an important part of the air compressor. It can effectively filter out all kinds of impurities and avoid problems such as jams caused by the entry of impurities. Therefore, it is recommended to replace the air compressor filter element every 3000 hours or so.

3. Add water lubricants regularly

Oil-water lubricated air compressors require regular addition of water lubricants to provide adequate lubrication protection for the machine. When adding water lubricants, you need to pay attention to the dosage to avoid adding too much or too little.

4. Regularly check the pneumatic system

Frequent inspection of the pneumatic system is a necessary measure to ensure better performance of the air compressor. Regularly check the operation of pneumatic system subsets and valves to identify and resolve potential problems. In addition, compressor components, output pipes, etc. inside the machine also need to be inspected regularly.

5. Regularly replace water lubricants

Although oil-free lubricated air compressors do not use traditional oil lubricants, the correspondingly used water lubricants still need to be replaced regularly. It is generally recommended to replace purified water every 3000 hours or so.

6. Timely ask professional personnel for maintenance and repair

Under normal maintenance conditions of the air compressor, failure will generally not be encountered. However, if the air compressor fails, do not disassemble it privately, and should promptly ask professional maintenance personnel to handle it.

Welcome!

Related Articles:
@air
2025-04-08

Basic knowledge that novices to oil-free lubricated air compressors need to understand

If you are a novice who has never used an oil-free lubricated air compressor before, then you should understand the following basic knowledge about oil-free lubricated air compressors, so that you can understand and use air compressors faster.

@air
2025-03-28

Introduction to the structure of high-pressure oilless air compressor

High-pressure oil-free air compressor, also known as oil-free air compressor, is a special compressor equipment. No lubricant is added during its working process, so the discharged gas does not contain oil. This kind of air compressor is widely used in medical, food, electronics, optics and other industries, because these industries have extremely high requirements for the purity of gases.

@ghuang
2025-03-12

How to Select Oil-Free Water-Lubricated Air Compressors for Beer Production

Oil-free water-lubricated air compressors serve as a core choice for beer manufacturers to meet international standards, improve product quality, and enhance economic efficiency by providing clean and stable compressed air. During selection, process requirements, technical parameters, and full lifecycle cost analysis should be integrated to ensure equipment performance aligns with corporate strategic goals. In the future, advancements in energy-saving technologies and intelligent controls will further drive sustainable development in the beer industry.

@ghuang
2025-03-11

How to Select Air Compressors for Vitamin C Production

Oil-free water-lubricated compressors are essential for Vitamin C production, ensuring international compliance and product quality. Their oil-free operation, high efficiency, and low maintenance reduce compliance risks while optimizing lifecycle costs. Selection must consider process parameters, environmental requirements, and certification systems to ensure reliability and economic performance.

@air
2025-03-28

The principle of use of high-pressure oilless air compressor

The high-pressure oil-free air compressor compresses the air into high-pressure, pure and oil-free compressed air through steps such as air intake and preliminary filtration, gas compression, cooling and separation, and high-pressure gas output, and delivers it to the place where it needs to be used through pipelines.